Object: U01319 On scan num: 867 869 871 873 875 877 Off scan num: 868 870 872 874 876 878 R.A.: 1.858004 hrs Dec.: 36.064291 deg On azimuth: 71.149339 deg On zenith dist.: 50.699404 deg Off azimuth: 71.130296 deg Off zenith dist.: 50.733840 deg MJD: 52508 UTC: 0.198958 Center freq.: 1395.827455 MHz Doppler: 0.00008562 Num. correlators: 2 Spectrom. atten.: 41 42 dB Bandwidth: 10.0 MHz Num. channels: 1024 Eff. integration: 1740 seconds
This spectrum is the integration of all data for the scan with spectra from both polarizations added together. The spectral intensities are Ssys * (on - off) / off, where Ssys is the system temperature in Jy. The system noise flux density equivalent is calibrated for each scan with a calibration noise source firing during each scan. The cal value, in Jy, is calibrated by comparison with a number of continuum sources as described in the summary web page
This spectrum is the same as Figure 1 but with 2 60-second sub-integrations manually deleted because of interference or a bad baseline.
This is the section of spectrum measured to obtain the parameters listed below. The three horizontal dotted lines are the baseline, the peak level selected, and 20% of the peak level. The two vertical dotted lines mark the selected 20% line width edges. The solid horizontal line marks the velocity range chosen for the the line profile flux density integral. This spectrum has a second-order least squares fit baseline removed using most of the baseline shown in Figure 2.
Peak intensity: 0.007 Jy
Lower 20% velocity: 5169.9 km/s
Upper 20% velocity: 5452.8 km/s
Systemic velocity: 5311.3 km/s
Line width (20%): 282.9 km/s
Profile integral: 1.57 Jy * km/s
A: 1.20
B: 1.70
Ratio B/A: 1.416
Flux integral
velocity range: 5138.2 - 5479.7 km/s