Object: U01416 On scan num: 879 881 883 885 887 889 Off scan num: 880 882 884 886 888 890 R.A.: 1.946069 hrs Dec.: 36.888213 deg On azimuth: 76.049081 deg On zenith dist.: 39.231257 deg Off azimuth: 76.031182 deg Off zenith dist.: 39.266442 deg MJD: 52508 UTC: 0.243866 Center freq.: 1395.096339 MHz Doppler: 0.00008598 Num. correlators: 2 Spectrom. atten.: 41 42 dB Bandwidth: 10.0 MHz Num. channels: 1024 Eff. integration: 1680 seconds
This spectrum is the integration of all data for the scan with spectra from both polarizations added together. The spectral intensities are Ssys * (on - off) / off, where Ssys is the system temperature in Jy. The system noise flux density equivalent is calibrated for each scan with a calibration noise source firing during each scan. The cal value, in Jy, is calibrated by comparison with a number of continuum sources as described in the summary web page
This spectrum is the same as Figure 1 but with 4 60-second sub-integrations manually deleted because of interference or a bad baseline.
This is the section of spectrum measured to obtain the parameters listed below. The three horizontal dotted lines are the baseline, the peak level selected, and 20% of the peak level. The two vertical dotted lines mark the selected 20% line width edges. The solid horizontal line marks the velocity range chosen for the the line profile flux density integral. This spectrum has a second-order least squares fit baseline removed using most of the baseline shown in Figure 2.
Peak intensity: 0.009 Jy
Lower 20% velocity: 5275.7 km/s
Upper 20% velocity: 5668.9 km/s
Systemic velocity: 5472.3 km/s
Line width (20%): 393.2 km/s
Profile integral: 1.83 Jy * km/s
A: 1.67
B: 1.42
Ratio B/A: 0.849
Flux integral
velocity range: 5259.6 - 5689.0 km/s