CIG452 Scan 124


Observing log information

  Object:           CIG452
  On scan num:      124 126 128 130 132 134
  Off scan num:     125 127 129 131 133 135
  R.A.:             10.988803 hrs
  Dec.:             71.844764 deg
  On azimuth:       21.406643 deg
  On zenith dist.:  42.031270 deg
  Off azimuth:      21.419127 deg
  Off zenith dist.: 42.050172 deg
  MJD:              52769
  UTC:              0.900081
  Center freq.:     1393.239003 MHz
  Doppler:          -0.00005124
  Num. correlators: 2
  Spectrom. atten.: 27 40 dB
  Bandwidth:        40.0 MHz
  Num. channels:    1024
  Eff. integration: 1800 seconds

Raw spectrum

This spectrum is the integration of all data for the scan with spectra from both polarizations added together. The spectral intensities are Ssys * (on - off) / off, where Ssys is the system temperature in Jy. The system noise flux density equivalent is calibrated for each scan with a calibration noise source firing during each scan. The cal value, in Jy, is calibrated by comparison with a number of continuum sources as described in the summary web page

Figure 1. Unedited spectrum

Measured spectrum

This is the section of spectrum measured to obtain the parameters listed below. The three horizontal dotted lines are the baseline, the peak level selected, and 20% of the peak level. The two vertical dotted lines mark the selected 20% line width edges. The solid horizontal line marks the velocity range chosen for the the line profile flux density integral. This spectrum has a second-order least squares fit baseline removed using most of the baseline shown in Figure 1.

Figure 2. Measured spectrum

Measured parameters

  Peak intensity:      0.006 Jy
  Lower 20% velocity: 6682.5 km/s
  Upper 20% velocity: 6996.8 km/s
   Systemic velocity: 6839.7 km/s
   Line width (20%):   314.3 km/s
  Profile integral:    1.28 Jy * km/s
                 A:    1.17
                 B:    1.28
         Ratio B/A:   1.093
  Flux integral
     velocity range:  6646.6 - 7017.4 km/s