Object: DDO_210 On scan num: 159 Off scan num: 160 R.A.: 20.781399 hrs Dec.: -12.849398 deg On azimuth: 181.178881 deg On zenith dist.: 51.172361 deg Off azimuth: 181.136953 deg Off zenith dist.: 51.171637 deg MJD: 52377 UTC: 0.528854 Center freq.: 1419.592046 MHz Doppler: 0.00009383 Num. correlators: 2 Spectrom. atten.: 35 42 dB Bandwidth: 5.0 MHz Num. channels: 1024 Eff. integration: 300 seconds
This spectrum is the integration of all data for the scan with spectra from both polarizations added together. The spectral intensities are Ssys * (on - off) / off, where Ssys is the system temperature in Jy. The system noise flux density equivalent is calibrated for each scan with a calibration noise source firing during each scan. The cal value, in Jy, is calibrated by comparison with a number of continuum sources as described in the summary web page
This is the section of spectrum measured to obtain the parameters listed below. The three horizontal dotted lines are the baseline, the peak level selected, and 20% of the peak level. The two vertical dotted lines mark the selected 20% line width edges. The solid horizontal line marks the velocity range chosen for the the line profile flux density integral. This spectrum has a second-order least squares fit baseline removed using most of the baseline shown in Figure 1.
Peak intensity: 0.656 Jy Lower 20% velocity: -156.2 km/s Upper 20% velocity: -125.8 km/s Systemic velocity: -141.0 km/s Line width (20%): 30.3 km/s Profile integral: 13.87 Jy * km/s A: 12.81 B: 13.87 Ratio B/A: 1.083 Flux integral velocity range: -177.2 - -107.2 km/s