Object: LVM333. On scan num: 33 35 37 39 41 43 Off scan num: 34 36 38 40 42 44 R.A.: 9.452065 hrs Dec.: 42.571531 deg On azimuth: 290.716698 deg On zenith dist.: 30.485483 deg Off azimuth: 290.709188 deg Off zenith dist.: 30.451821 deg MJD: 52350 UTC: 0.240602 Center freq.: 1381.974694 MHz Doppler: -0.00006453 Num. correlators: 2 Spectrom. atten.: 35 42 dB Bandwidth: 10.0 MHz Num. channels: 1024 Eff. integration: 1620 seconds
This spectrum is the integration of all data for the scan with spectra from both polarizations added together. The spectral intensities are Ssys * (on - off) / off, where Ssys is the system temperature in Jy. The system noise flux density equivalent is calibrated for each scan with a calibration noise source firing during each scan. The cal value, in Jy, is calibrated by comparison with a number of continuum sources as described in the summary web page
This spectrum is the same as Figure 1 but with 6 60-second sub-integrations manually deleted because of interference or a bad baseline.
This is the section of spectrum measured to obtain the parameters listed below. The three horizontal dotted lines are the baseline, the peak level selected, and 20% of the peak level. The two vertical dotted lines mark the selected 20% line width edges. The solid horizontal line marks the velocity range chosen for the the line profile flux density integral. This spectrum has a second-order least squares fit baseline removed using most of the baseline shown in Figure 2.
Peak intensity: 0.018 Jy Lower 20% velocity: 8251.5 km/s Upper 20% velocity: 8373.0 km/s Systemic velocity: 8312.3 km/s Line width (20%): 121.5 km/s Profile integral: 1.78 Jy * km/s A: 1.59 B: 1.79 Ratio B/A: 1.129 Flux integral velocity range: 8241.3 - 8378.5 km/s