pipeline.hif.tasks.editimlist package

Submodules

pipeline.hif.tasks.editimlist.editimlist module

A pipeline task to add to a list of images to be made by hif_makeimages()

The hif_editimlist() task typically uses a parameter file as input. Depending on the use case, there will usually be a minimal set of input parameters defined in this file. Each set of image parameters gets stored in the global context in the clean_list_pending attribute.

Example

A common case is providing a list of VLASS image parameters via a file:

CASA <1>: hif_editimlist(parameter_file='vlass_QLIP_parameters.list')

The vlass_QLIP_parameters.list file might contain something like the following:

phasecenter='J2000 12:16:04.600 +059.24.50.300'
imagename='QLIP_image'

An equivalent way to invoke the above example would be:

CASA <2>: hif_editimlist(phasecenter='J2000 12:16:04.600 +059.24.50.300',
                         imagename='QLIP_image')

Any imaging parameters that are not specified when hif_editimlist() is called, either as a task parameter or via a parameter file, will have a default value or heuristic applied.

class pipeline.hif.tasks.editimlist.editimlist.Editimlist(inputs)[source]

Bases: pipeline.infrastructure.basetask.StandardTaskTemplate

Inputs

alias of EditimlistInputs

analyse(result)[source]

Determine the best parameters by analysing the given jobs before returning any final jobs to execute.

Parameters

jobs (a list ofJobRequest) – the job requests generated by prepare()

Return type

Result

is_multi_vis_task = True
prepare()[source]

Prepare job requests for execution.

Parameters

parameters – the parameters to pass through to the subclass. Refer to the implementing subclass for specific information on what these parameters are.

Return type

a class implementing Result

class pipeline.hif.tasks.editimlist.editimlist.EditimlistInputs(context, output_dir=None, vis=None, search_radius_arcsec=None, cell=None, cfcache=None, conjbeams=None, cyclefactor=None, cycleniter=None, datacolumn=None, deconvolver=None, editmode=None, field=None, imaging_mode=None, imagename=None, imsize=None, intent=None, gridder=None, mask=None, nbin=None, nchan=None, niter=None, nterms=None, parameter_file=None, pblimit=None, phasecenter=None, reffreq=None, restfreq=None, robust=None, scales=None, specmode=None, spw=None, start=None, stokes=None, threshold=None, nsigma=None, uvtaper=None, uvrange=None, width=None, sensitivity=None)[source]

Bases: pipeline.infrastructure.vdp.StandardInputs

cell

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

cfcache

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

conjbeams

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

cyclefactor

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

cycleniter

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

datacolumn

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

deconvolver

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

editmode

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

field

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

gridder

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

imagename

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

imaging_mode

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

imsize

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

intent

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

mask

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

nbin

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

nchan

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

niter

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

nsigma

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

nterms

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

parameter_file

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

pblimit

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

phasecenter

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

reffreq

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

restfreq

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

robust

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

scales

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

search_radius_arcsec

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

sensitivity

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

specmode

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

spw

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

start

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

stokes

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

threshold

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

uvrange

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

uvtaper

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

width

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

pipeline.hif.tasks.editimlist.resultobjects module

class pipeline.hif.tasks.editimlist.resultobjects.EditimlistResult[source]

Bases: pipeline.infrastructure.basetask.Results

add_target(target)[source]
capture_buffer_size(buffsize)[source]
property max_num_targets
merge_with_context(context)[source]

Merge these results with the given context.

This method will be called during the execution of accept(). For calibration tasks, a typical implementation will register caltables with the pipeline callibrary.

At this point the result is deemed safe to merge, so no further checks on the context need be performed.

Parameters

context (Context) – the target Context

property num_targets
set_max_num_targets(max_num_targets)[source]

Module contents