pipeline.hif.tasks.gaincal package

Submodules

pipeline.hif.tasks.gaincal.common module

class pipeline.hif.tasks.gaincal.common.GaincalResults(final=None, pool=None, subtask_results=None)[source]

Bases: pipeline.infrastructure.basetask.Results

GaincalResults is the results class common to all pipeline gaincal calibration tasks.

merge_with_context(context, to_field=None, to_intent=None)[source]

Merge these results with the given context.

This method will be called during the execution of accept(). For calibration tasks, a typical implementation will register caltables with the pipeline callibrary.

At this point the result is deemed safe to merge, so no further checks on the context need be performed.

Parameters

context (Context) – the target Context

class pipeline.hif.tasks.gaincal.common.VdpCommonGaincalInputs(context, output_dir=None, vis=None, caltable=None, intent=None, field=None, spw=None, refant=None, antenna=None, minblperant=None, opacity=None, selectdata=None, uvrange=None, calmode=None, refantmode=None)[source]

Bases: pipeline.hif.tasks.common.commoncalinputs.VdpCommonCalibrationInputs

CommonGaincalInputs is the base class for defines inputs that are common to all pipeline bandpass calibration tasks.

CommonGaincalInputs should be considered an abstract class. Refer to the specializations that inherit from CommonBandpassInputs for concrete implementations.

calmode

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

caltable

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

intent

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

refantmode

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

pipeline.hif.tasks.gaincal.gaincalmode module

class pipeline.hif.tasks.gaincal.gaincalmode.GaincalMode(inputs)[source]

Bases: pipeline.infrastructure.basetask.ModeTask

Inputs

alias of GaincalModeInputs

class pipeline.hif.tasks.gaincal.gaincalmode.GaincalModeInputs(context, mode='gtype', **parameters)[source]

Bases: pipeline.infrastructure.vdp.ModeInputs

pipeline.hif.tasks.gaincal.gaincalworker module

class pipeline.hif.tasks.gaincal.gaincalworker.GaincalWorker(inputs)[source]

Bases: pipeline.infrastructure.basetask.StandardTaskTemplate

GaincalWorker performs a simple gain calibration exactly as specified by the inputs, with no analysis or parameter refinement.

As this task has no analysis, it is not expected to be used in an interactive session. The use-case for this task is as a worker task for higher-level tasks.

Inputs

alias of GaincalWorkerInputs

analyse(result)[source]

Determine the best parameters by analysing the given jobs before returning any final jobs to execute.

Parameters

jobs (a list ofJobRequest) – the job requests generated by prepare()

Return type

Result

prepare()[source]

Prepare job requests for execution.

Parameters

parameters – the parameters to pass through to the subclass. Refer to the implementing subclass for specific information on what these parameters are.

Return type

a class implementing Result

class pipeline.hif.tasks.gaincal.gaincalworker.GaincalWorkerInputs(context, output_dir=None, vis=None, caltable=None, field=None, spw=None, antenna=None, uvrange=None, intent=None, selectdata=None, gaintype=None, smodel=None, calmode=None, solint=None, combine=None, refant=None, refantmode=None, minblperant=None, minsnr=None, solnorm=None, append=None, scan=None, splinetime=None, npointaver=None, phasewrap=None, opacity=None, preavg=None, parang=None)[source]

Bases: pipeline.hif.tasks.gaincal.common.VdpCommonGaincalInputs

pipeline.hif.tasks.gaincal.gsplinegaincal module

class pipeline.hif.tasks.gaincal.gsplinegaincal.GSplineGaincal(inputs)[source]

Bases: pipeline.hif.tasks.gaincal.gaincalworker.GaincalWorker

Inputs

alias of GSplineGaincalInputs

class pipeline.hif.tasks.gaincal.gsplinegaincal.GSplineGaincalInputs(context, output_dir=None, vis=None, caltable=None, field=None, spw=None, antenna=None, uvrange=None, intent=None, smodel=None, calmode=None, refant=None, refantmode=None, minblperant=None, splinetime=None, npointaver=None, append=None, phasewrap=None, opacity=None, parang=None, preavg=None)[source]

Bases: pipeline.hif.tasks.gaincal.common.VdpCommonGaincalInputs

append

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

property gaintype
npointaver

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

parang

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

phasewrap

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

preavg

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

splinetime

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

pipeline.hif.tasks.gaincal.gtypegaincal module

class pipeline.hif.tasks.gaincal.gtypegaincal.GTypeGaincal(inputs)[source]

Bases: pipeline.hif.tasks.gaincal.gaincalworker.GaincalWorker

Inputs

alias of GTypeGaincalInputs

class pipeline.hif.tasks.gaincal.gtypegaincal.GTypeGaincalInputs(context, output_dir=None, vis=None, caltable=None, field=None, spw=None, antenna=None, uvrange=None, intent=None, smodel=None, calmode=None, solint=None, combine=None, refant=None, refantmode=None, minblperant=None, minsnr=None, solnorm=None, append=None, scan=None, preavg=None, opacity=None, parang=None, gaintype=None)[source]

Bases: pipeline.hif.tasks.gaincal.common.VdpCommonGaincalInputs

append

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

combine

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

gaintype

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

minsnr

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

parang

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

preavg

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

scan

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

solint

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

solnorm

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

pipeline.hif.tasks.gaincal.ktypegaincal module

class pipeline.hif.tasks.gaincal.ktypegaincal.KTypeGaincal(inputs)[source]

Bases: pipeline.hif.tasks.gaincal.gaincalworker.GaincalWorker

Inputs

alias of KTypeGaincalInputs

class pipeline.hif.tasks.gaincal.ktypegaincal.KTypeGaincalInputs(context, output_dir=None, vis=None, caltable=None, field=None, intent=None, spw=None, antenna=None, uvrange=None, smodel=None, calmode=None, solint=None, combine=None, refant=None, refantmode=None, minblperant=None, minsnr=None, solnorm=None, append=None, scan=None, opacity=None, parang=None)[source]

Bases: pipeline.hif.tasks.gaincal.common.VdpCommonGaincalInputs

append

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

combine

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

gaintype

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

minsnr

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

parang

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

scan

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

solint

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

solnorm

VisDependentProperty is a Python data descriptor that standardises the behaviour of pipeline Inputs properties and lets them create default values more easily.

On reading a VisDependentProperty (ie. using the dot prefix: inputs.solint), one of two things happens:

  1. If a NullMarker is found - signifying that no user input has been provided - and a ‘getter’ function has been defined, the getter function will be called to provide a default value for that measurement set.

  2. If a user has overridden the value (eg. inputs.solint = 123), that value will be retrieved.

  3. The value, either the default from step 1 or user-provided from step 2, is run through the optional postprocess function, which gives a final opportunity to change the value depending on the state/value of other properties.

A VisDependentProperty can be made read-only by specifying ‘readonly=True’ when creating the instance.

A VisDependentProperty can be hidden from the containing Inputs string representation by setting ‘hidden=True’ when creating the instance. This will hide the property from the web log and CLI getInputs calls.

Each VisDependentProperty has a set of values it considers equivalent to null. When the user sets the VDP value to one of these null values, the VDP machinery converts this to a private NullObject marker that signifies the property is now unset, resulting in the default value being returned next time the property is read. Developers can specify which values should be converted to NullObject by specifying null_input at creation time, e.g.,

solint = @VisDependentProperty(default=5, null_input=[None, ‘’, ‘RESET’, -1])

pipeline.hif.tasks.gaincal.ktypegaincal.hif_gaincal(vis=None, caltable=None, field=None, intent=None, spw=None, antenna=None, hm_gaintype=None, calmode=None, solint=None, combine=None, refant=None, solnorm=None, minblperant=None, minsnr=None, smodel=None, splinetime=None, npointaver=None, phasewrap=None, pipelinemode=None, dryrun=None, acceptresults=None)[source]

Module contents