| Responsible: Effland |
| | *************************************************************************************** |
| | RID 1683 |
| | Doc. Title | | Band 6 design Report | Originator: Stephane Claude | Date: 2007-09-11 |
| | Description: | | P93-94, the mass budget presented is done in two different ways. The specification calls |
| | for 2kg maximum therefore Band 6 exceeds the specification by 108g (according to figure |
| | 93). That is not what is reported in the compliance matrix P106 section 4.1: specs is |
| | 10.6kg (where does this come from?) measured value 14.4kg. |
| Suggested Solution: | | Clarify and refer strictly to the specification. |
| | *************************************************************************************** |
| | RID 1685 |
| | Doc. Title | | Band 6 design Report | Originator: Stephane Claude | Date: 2007-09-11 |
| | Description: | | P108 section 5.4.2. The comment refers to drop test with the shipping container. This |
| | should be in section 5.5 “storage and shipping condition” and not in the environmental |
| | operating condition section. |
| Suggested Solution: | | Update Matrix |
| | *************************************************************************************** |
| | RID 1686 |
| | Doc. Title | | Band 6 design Report | Originator: Stephane Claude | Date: 2007-09-11 |
| | Description: | | P106 section 4.4. spec calls for A, R and T. Analysis has been done with the FEA. |
| Suggested Solution: | | Update Matrix |
| | *************************************************************************************** |
| | RID 1709 |
| | Doc. Title | | Specification, Section 4.3.3 | Originator: James Lamb | Date: 2007-09-09 |
| | Description: | | What does 'Each 8 GHz of bandwidth shall be evenly split into upper and lower sidebands |
| | and these shall be centered at 8 GHz' mean? i.e., Two 8-GHz IF bands, with equal system |
| | temperatures, two 4-GHz bands (as opposed to a 2 GHz and a 6 GHz band, ...) |
| Suggested Solution: |
| | *************************************************************************************** |
| | RID 1711 |
| | Doc. Title | | Specification, Section 5.5 | Originator: James Lamb | Date: 2007-09-09 |
| | Description: | | What does the notation 'sigma^2(2, T, 0.9*T)' mean? |
| | What is the input to the cartridge for this measurement (300 K load, 77 K load)? |
| Suggested Solution: |
| ------------------------------------------------------------------------------------------------------------- |
| Printed 2007-09-18 16:52:28 | Page 3 of 8 |